Protective effect of gamma-oryzanol against manganese-induced toxicity in Drosophila melanogaster

Environmental Science and Pollution Research - Manganese (Mn) is an essential element that, in excess, seems to be involved in the development of different neurodegenerative conditions....     

Influence of pyrolysis temperature on production and nutrient properties of wastewater sludge biochar

The important challenge for effective management of wastewater sludge materials in an environmentally and economically acceptable way can be addressed through pyrolytic conversion of the sludge to biochar and agricultural applications of the biochar. The aim of this work is to investigate the influence of pyrolysis temperature on production of wastewater sludge biochar and evaluate the properties required for agronomic applications. Wastewater sludge collected from an urban wastewater treatment plant was pyrolysed in a laboratory scale reactor. It was found that by increasing the pyrolysis temperature (over the range from 300 °C to 700 °C) the yield of biochar decreased. Biochar produced at low temperature was acidic whereas at high temperature it was alkaline in nature. The concentration of nitrogen was found to decrease while micronutrients increased with increasing temperature. Concentrations of trace metals present in wastewater sludge varied with temperature and were found to primarily enriched in the biochar.     

PCB mass transfer coefficients determined by application of a water surface sampler

A water surface sampler (WSS) was employed in combination with greased surface deposition plates (GSDPs) to measure the particulate dry deposition and gas exchange of polychlorinated biphenyls (PCBs) in Chicago, IL. Vapor phase PCB fluxes were calculated by subtracting the particulate fluxes obtained from GSDPs from total (particulate+gas) fluxes obtained from the WSS. Vapor phase PCB fluxes were divided by ambient air concentrations measured with a high volume sampler to calculate overall gas phase PCB mass transfer coefficients (K(G)). The calculated average PCB MTC was 0.54+/-0.47 cm s(-1). This experimentally determined average gas phase overall mass transfer coefficient, K(G), agreed well with the ones reported from studies using similar techniques and agreed well with modeled values obtained using MTC correlations developed for the WSS.     

Anthropogenic climate change drives melting of glaciers in the Himalaya

Environmental Science and Pollution Research - The Himalayan glaciers provide water to a large population in south Asia for a variety of purposes and ecosystem services. As a result, regional...     

Forecasting carbon emissions due to electricity power generation in Bahrain

Environmental Science and Pollution Research - Global warming and climate change have become one of the most embarrassing and explosive problems/challenges all over the world, especially in...     

Recovery of valuable metals from WPCB fines by centrifugal gravity separation and froth flotation

Journal of Material Cycles and Waste Management - This paper reports physical and physicochemical routes for the recycling of gold, silver, and copper from waste printed circuit boards (WPCBs). The...     

Epichlorohydrin Crosslinked 2,4-Dihydroxybenzaldehyde Schiff Base Chitosan@SrFe12O19 (EP-DBSB-CS@SrFe12O19) Magnetic Nanocomposite for Efficient Removal of Pb(II) and Cd(II) from Aqueous Solution

Journal of Polymers and the Environment - In this paper, new epichlorohydrin crosslinked 2,4-dihydroxybenzaldehyde Schiff base chitosan@SrFe12O19 magnetic nanocomposite (EP-DBSB-CS@SrFe12O19) was...     

Fixed-bed column sorption of borate onto pomegranate seed powder-PVA beads: a response surface methodology approach

Pomegranate seed powder (PS) was functionalized with polyvinyl alcohol (PVA) and utilized for boron removal from the aqueous system. Results of Brunauer--Emmett--Teller (BET) surface area analysis and Boehm titration indicated notable decrease in total surface area and increase in acidic surface functional groups of PS after PVA modification. Enhanced sorption is indicative of complex formation between diol groups of the pomegranate seed powder--polyvinyl alcohol (PS–PVA) and borate ions. Under column test, the saturated sorption capacity of boron was noted to be dependent on flow rate and bed height. The developed central composite design (CCD) was adequate to elucidate the sorption mechanism. Mathematical modeling of the column data was conducted, and a modified-dose-response model was the most suitable to describe the breakthrough curve and observed to be consistent with CCD analysis. This is further supported by extensive error analyses conducted between the model predicted and experimental data.     

A GIS-based model for rating natural protection areas according to natural protection priorities

There has been a major urban shift of population in Turkey over the last century. Most people lived in rural areas until 1960, but now more than half live in urban areas. This trend has continued over the last 20 years, as families moved further away from city centres to find houses in the country, and this has caused land use to change rapidly. In decision-making studies to protect nature areas, rating and assessment of ecological data by scientific verification is difficult due to the huge volume and diversity of data. Therefore, the search for the most suitable and applicable method to achieve physical planning based on ecological understanding has been sought. The necessity for numerous parameters to be taken into account has stimulated the use of geographic information systems (GIS). This study assesses the usefulness of a GIS-based model in the protected area of Kaynaklar County, to the south of the city of Izmir. Existing cultural and natural land-use types, as well as soil, hydrologic, geologic and geomorphologic data layers (future classes) were gathered from field observation and using Landsat and IKONOS satellite images, and transferred to a database according to GIS rules. Index values were determined by taking impact on attributes of natural protection as a priority and these were attached to each feature class. Layers of data were merged by spatial intersection methods and new polygons were created for both cultural and natural features. A three-grade final map of the study area was generated using total index values of each new polygon.